V-belt Optibelt 17 x 1250 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 x 1250 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 x 1250 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with a B profile and a length of 1250 mm. It has a top width of 17 mm, a height of 11 mm and a 40-degree angle. Use the marking on the old belt to confirm the profile and length before ordering.
To match this belt to the one being replaced, read the back of the old belt. You are looking for the profile letter and the length. The profile is B, and the length is 1250 mm. The code 17 x 1250 Li reflects the top width of 17 mm and the length of 1250 mm. If the old belt is too worn to read, measure the top width and the outside length, then compare them with these figures.
This is a classical V-belt, not a narrow wedge belt, cogged belt, timing belt or serpentine belt. It is 17 mm across the top, 11 mm high and has a 40-degree angle. The B profile and 1250 mm length are the two dimensions that must match your drive. If your drive uses a different profile or length, this belt will not fit.
We carry the Optibelt VB S=C Plus line. When you request a quote, send the part number 17 x 1250 Li or the profile and length. If you are unsure, send a photo of the marking on the old belt. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 1250mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the belt you are replacing. It should show the profile B and the length 1250 mm. You can also measure the top width, which should be 17 mm, and the height, which should be 11 mm.
- What should I send to request a quote?
- Send the part number 17 x 1250 Li, or the profile and length from the old belt. If the marking is unreadable, send a photo of the belt and the drive.
- Is this a narrow V-belt?
- No. This is a classical V-belt with a B profile. It has a top width of 17 mm, a height of 11 mm and a 40-degree angle.