V-belt Optibelt 17 X 1250 CP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Conveyor Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 X 1250 CP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 X 1250 CP and any equivalents.
The Optibelt 17 X 1250 CP is a classical V-belt from the Conveyor Power series, built to profile B with a 17 mm top width, 11 mm height and 40 degree angle. It measures 1250 mm in length. When you need to identify or replace this belt, the marking on the back of the old belt is the most reliable starting point.
Before you pull a belt off a drive, read the marking on its back. That print line usually carries the profile and the length, and on this belt it reads 17 X 1250 CP. Copy it exactly as it appears, including the profile letter and the length figure, rather than measuring a worn belt and rounding the result. A stretched or abraded belt can measure short of its original figure and lead you to the wrong replacement.
Once you have the marking, match it against the profile and length on this page: profile B, 1250 mm, with a 17 mm top width, 11 mm height and 40 degree angle. If the print has worn off, check the drive for any record of the original belt, or send us the equipment details and we can help confirm the right belt or suggest an equivalent.
For a quote, send the part number 17 X 1250 CP by WhatsApp or email, along with the quantity you need. If you are replacing belts on a multi-belt drive, list every belt position so we can quote the full set.
Dimensions
- Section
- B
- Length
- 1250mm
Frequently asked questions
- How do I confirm this is the right belt before ordering?
- Read the marking on the back of the belt you are replacing. If it matches 17 X 1250 CP, the profile and length line up with this belt. If the marking is unreadable, send us the drive details and we can help confirm the right belt or suggest an equivalent.
- What are the dimensions of the Optibelt 17 X 1250 CP?
- It is a classical V-belt in profile B with a 1250 mm length, 17 mm top width, 11 mm height and a 40 degree angle.
- What should I send to request a quote?
- Send the part number 17 X 1250 CP and the quantity you need by WhatsApp or email. If the drive takes more than one belt, include each belt position so we can quote the set.