V-belt Optibelt 17 X 1199 CP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Conveyor Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 X 1199 CP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 X 1199 CP and any equivalents.
The Optibelt 17 X 1199 CP is a classical V-belt from the Conveyor Power series. It has a B profile, a top width of 17 mm, a height of 11 mm and a 40-degree angle. This page covers how to match it to the belt you are replacing.
Before you order, read the marking on the back of the old belt. Confirm the part number 17 X 1199 CP, the profile B, and the 1199 mm length. Check that the top width is 17 mm, the height is 11 mm and the angle is 40 degrees. If the old belt is worn or the marking is unreadable, measure the top width and the outside length and compare them to these values.
The 17 X 1199 CP is a classical V-belt with a B profile. It is not a narrow V-belt, cogged belt, timing belt, Poly-V belt, double-V belt, banded belt, variable speed belt or CVT belt. Use it only where a classical B-profile belt with a 1199 mm length is specified. If the drive uses a different profile or length, this belt will not fit.
When you request a quote, send the part number 17 X 1199 CP and the quantity you need. If you are replacing more than one belt on the same drive, include the quantity for the full set. Our team can confirm the belt or suggest an equivalent based on the profile and length you provide.
Dimensions
- Section
- B
- Length
- 1199mm
Frequently asked questions
- How do I confirm the 17 X 1199 CP is the right belt for my drive?
- Check the marking on the old belt for the part number 17 X 1199 CP, profile B and length 1199 mm. Also verify the top width is 17 mm, the height is 11 mm and the angle is 40 degrees. If the marking is gone, measure the top width and outside length and compare them to these values.
- What should I send to get a quote for this belt?
- Send the part number 17 X 1199 CP and the quantity you need. If you are replacing a set, include the number of belts on the drive. If you are unsure, send the old belt marking or the measured profile and length.
- Is this belt a narrow V-belt or a cogged belt?
- No. The 17 X 1199 CP is a classical V-belt with a B profile. It is not a narrow V-belt, cogged belt, timing belt, Poly-V belt, double-V belt, banded belt, variable speed belt or CVT belt.