V-belt Optibelt 17 X 1180 CP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Conveyor Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 17 X 1180 CP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 17 X 1180 CP and any equivalents.
The Optibelt 17 X 1180 CP is a classical V-belt from the Conveyor Power series. Its profile and length are the two dimensions that matter most when you select a replacement: profile B and 1180 mm. The 17 mm top width and 11 mm height confirm the cross-section, and the 40° angle defines how it seats in the pulley groove.
When you read a belt marking, the profile and length are what let you match a drive without pulling the old belt first. This belt is profile B, 1180 mm long, with a 17 mm top width and 11 mm height. The 40° angle is the standard V-belt flank angle for this cross-section.
If you are replacing a belt on a conveyor or similar drive, compare the profile and length on the back of the old belt with these values. A matching profile and length keeps the belt seated correctly in the pulley groove and maintains the drive ratio. If the marking is worn or unreadable, measure the top width and the outside length and send those along with the part number.
Dimensions
- Section
- B
- Length
- 1180mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- Profile B and 1180 mm are the cross-section and length. The 17 mm top width and 11 mm height define the profile, and the 40° angle is the flank angle that contacts the pulley groove.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the old belt for profile and length. If it reads B and 1180 mm, this belt matches those dimensions. If the marking is gone, measure the top width and outside length.
- What should I send to request a quote?
- Send the part number 17 X 1180 CP, or the profile and length from your old belt. If you have the old belt, a photo of the marking helps confirm the match.