Timing belt Optibelt 16 T5 / 180 AP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 16 T5 / 180 AP belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 16 T5 / 180 AP and any equivalents.
This Optibelt Alpha Power timing belt carries the part number 16 T5 / 180 AP. It has a T5 profile, a 180 mm length and a 5 mm pitch. Before you fit it, inspect the drive and the sheaves so the new belt runs true.
A timing belt is only as good as the drive it sits on. Check the sheaves for worn teeth, burrs or debris in the grooves, and confirm they are aligned and free of movement. Look at the flanges and the shaft bearings as well, because a rough or loose drive will shorten the life of any synchronous belt.
When you read the back of the old belt, match the marking to this part number: 16 T5 / 180 AP. The profile is T5 and the length is 180 mm, with a pitch of 5 mm. If the marking is worn away, measure the old belt and send us the profile and length so we can confirm the match.
Send the part number 16 T5 / 180 AP by WhatsApp or email to request a quote. If you are unsure whether this Optibelt Alpha Power belt fits your drive, include a photo of the old belt marking and the sheave details. We carry Optibelt and can help you confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- T5
- Pitch
- 5mm
- Length
- 180mm
Frequently asked questions
- What should I check on the drive before installing this Optibelt timing belt?
- Inspect the sheaves for worn or damaged teeth, check alignment and make sure the grooves are clean. Also check the flanges and bearings for play or roughness. A worn drive can damage a new belt quickly.
- How do I confirm the part number on the old belt?
- Look for the marking on the back of the belt. This belt is marked 16 T5 / 180 AP. If the marking is unreadable, measure the old belt and send us the profile and length.
- How do I request a quote for the 16 T5 / 180 AP?
- Send the part number 16 T5 / 180 AP by WhatsApp or email. If you need help confirming the fit, include a photo of the old belt marking and the sheave details.