Timing belt Optibelt 16 AT10K13 / 7800 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 16 AT10K13 / 7800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 16 AT10K13 / 7800 AFX and any equivalents.
When you need to match a timing belt to the one being replaced, start with the marking on the back of the old belt. This Optibelt Alpha Flex belt is identified by the code 16 AT10K13 / 7800 AFX, with an AT10 profile and a 7800 mm length. Use those same figures to confirm the replacement before you order.
The AT10 profile and 10 mm pitch define the tooth geometry, while the 7800 mm length sets the center distance. Compare these values directly with the belt you are removing. If the old belt is worn or the marking is unreadable, measure the length and count the teeth to verify the profile and pitch.
This is a timing belt, also called a synchronous belt, so it drives by tooth engagement rather than friction. The Optibelt Alpha Flex series is built for drives that need precise positioning and consistent speed. Confirm the belt width and tooth configuration from the original marking before requesting a quote.
Send the full code 16 AT10K13 / 7800 AFX, along with the profile and length, by WhatsApp or email. Our team can confirm the belt or suggest an equivalent based on the data you provide. Include a photo of the old belt marking if it helps clarify the identification.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 7800mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the belt being replaced. It should show the same code, AT10 profile, 10 mm pitch, and 7800 mm length. If the marking is worn, measure the length and verify the tooth profile before ordering.
- What information should I send with my quote request?
- Send the full part number 16 AT10K13 / 7800 AFX, the AT10 profile, and the 7800 mm length. If you have the old belt, include a clear photo of the back marking. That helps us confirm the correct replacement.
- Can you help if the old belt marking is unreadable?
- Yes. Provide the drive details and any measurements you can take, such as the length and tooth count. We will use that information to identify the correct timing belt for your application.