Timing belt Optibelt 16 AT10K13 / 7600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 16 AT10K13 / 7600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 16 AT10K13 / 7600 AFX and any equivalents.
The Optibelt 16 AT10K13 / 7600 AFX is an Alpha Flex timing belt with an AT10 profile and a 7600 mm length. The 10 mm pitch and AT10 tooth geometry identify the drive interface, while the length sets the center distance. Use these two values to confirm the belt matches your drive before requesting a quote.
The AT10 profile is a metric synchronous profile with a 10 mm pitch. The part number also carries a 16 designation, which is the belt width code for this construction. The 7600 mm length is the datum length for the belt. Together, profile, pitch and length define the belt's fit on the pulleys and the path around the drive.
When matching an existing belt, read the marking on the back of the belt. Confirm the profile and pitch, then measure or read the length. The 16 AT10K13 / 7600 AFX is identified by the combination of AT10 profile, 10 mm pitch and 7600 mm length. If the old belt marking is worn, send the drive details and pulley data so we can help confirm the correct belt.
For a quote, send the part number 16 AT10K13 / 7600 AFX, the quantity, and any drive details you have. If you are replacing a belt on a drive with more than one belt, note the set so we can quote accordingly. We carry Optibelt Alpha Flex timing belts and can help confirm the right belt or suggest an equivalent from the data you provide.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 7600mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The AT10 profile with a 10 mm pitch defines the tooth geometry and the pulley interface. The 7600 mm length defines the belt's path length. Both must match the drive for correct fit.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the existing belt for the profile, pitch and length. If it reads AT10, 10 mm pitch and 7600 mm length, this belt matches those values. Send the drive and pulley details if the marking is not clear.
- What information do you need for a quote?
- Send the part number 16 AT10K13 / 7600 AFX, the quantity, and any drive or pulley details. If the drive uses multiple belts, note the set quantity.