Timing belt Optibelt 16 AT10 / 11800 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 16 AT10 / 11800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 16 AT10 / 11800 AFX and any equivalents.
The Optibelt 16 AT10 / 11800 AFX is an Alpha Flex timing belt with an AT10 profile, a 10 mm pitch and a length of 11800 mm. We carry this belt for drives where the existing belt is marked with the same profile and length. Before fitting a replacement, inspect the drive and sheaves so the new belt is not damaged by worn components.
Check the sheaves for worn grooves, burrs, corrosion or buildup that can cut or abrade the belt teeth. Confirm the sheaves and flanges are clean and that the belt runs straight without rubbing on guards or structure. Verify the shaft alignment and bearing condition, because misalignment or play can cause edge wear and tracking problems even with a correctly sized belt.
Confirm the replacement matches the old belt by reading the marking on the back: AT10 profile, 11800 mm length and 10 mm pitch. The part number 16 AT10 / 11800 AFX identifies this Alpha Flex belt. If the marking is unreadable, measure the pitch and count teeth to verify the profile and length before ordering.
Send the belt marking or the part number by WhatsApp or email to request a quote. Our team replies promptly and can confirm the right belt for your drive or suggest an equivalent from the brands we carry.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 11800mm
Frequently asked questions
- What are the profile and length of this Optibelt belt?
- It is an AT10 profile timing belt with a 10 mm pitch and a length of 11800 mm, part number 16 AT10 / 11800 AFX.
- What should I check on the drive before fitting this belt?
- Inspect sheaves for wear, burrs or buildup, verify alignment and bearing condition, and make sure the belt path is clear of guards or debris.
- How do I request a quote for the Optibelt 16 AT10 / 11800 AFX?
- Send the part number or the marking on the back of the belt by WhatsApp or email. Our team replies promptly to confirm the belt or suggest an equivalent.