Timing belt Optibelt 1512 D14M 170
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 1512 D14M 170 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1512 D14M 170 and any equivalents.
This Optibelt Omega belt is a double-sided timing belt with a 1512 mm length. It is used where a drive needs synchronous power transmission from both faces of the belt, such as reversing or multi-pulley layouts. Confirm fit by matching the belt marking and the drive's pulley profile and center distance.
Double-sided timing belts are common on drives that turn pulleys in opposite directions from a single belt, or where two driven pulleys sit on either side of the belt path. Before ordering, check the old belt's back marking against 1512 D14M 170 and verify the pulley grooves and the belt width. The 1512 mm length is the datum you need to match.
If the marking is worn off, measure the drive rather than guessing. Count the pulley grooves, note the tooth profile, and confirm the center distance and take-up range. Send those details with the part number and our team can help confirm the right belt or suggest an equivalent.
For maintenance planning, inspect both belt faces for tooth shear, cracking and exposed cord, and check pulley wear and alignment. Replacing belts in sets on multi-belt drives keeps load sharing even. Send the part number 1512 D14M 170 by WhatsApp or email to request a quote.
Dimensions
- Length
- 1512mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Match the marking on the back of the old belt to 1512 D14M 170, then check the pulley tooth profile, belt width and center distance. If the marking is unreadable, send photos and drive details with your quote request.
- What should I send for a quote?
- Send the part number 1512 D14M 170, the quantity, and any drive details you have. If you are unsure of the exact belt, include the old belt marking or measurements so we can help confirm it.
- Can you suggest an equivalent if this exact belt is not what I need?
- Yes. Provide the belt marking, tooth profile, length and width, and our team can help confirm the right belt or suggest an equivalent.