Timing belt Optibelt 150 AT10 / 8600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 150 AT10 / 8600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 150 AT10 / 8600 AFX and any equivalents.
The Optibelt 150 AT10 / 8600 AFX is a timing belt in the Alpha Flex series. It uses the AT10 profile, has a 10 mm pitch, and measures 8600 mm in length. Use these three details to match it to the belt you are replacing.
Start with the marking on the back of the old belt. The replacement must share the same profile and the same length. This belt is AT10 profile and 8600 mm long. The 150 in the code refers to the belt's width in millimeters; confirm that width against your drive before ordering.
If the old belt is worn or the marking is unreadable, measure the length along the pitch line and check the tooth profile against the pulley grooves. The AT10 profile is distinct from other profiles, and the 10 mm pitch must match the pulley spacing. A belt with the wrong profile or pitch will not seat correctly.
Send the part number 150 AT10 / 8600 AFX, or the profile, length and width from your old belt, by WhatsApp or email. The team replies promptly and can confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 8600mm
Frequently asked questions
- How do I confirm this is the correct replacement belt?
- Check the marking on the back of the belt you are replacing. It should show the AT10 profile, an 8600 mm length, and a 150 mm width. If it does, this belt matches those specifications.
- What if the old belt's marking is worn off?
- Measure the length along the pitch line and confirm the tooth profile against the pulley grooves. The pitch is 10 mm and the profile is AT10. Send those details and we can help identify the correct belt.
- What information do you need to quote this belt?
- Send the part number 150 AT10 / 8600 AFX. If you are not sure of the part number, send the profile, length and width from the old belt. We reply promptly by WhatsApp or email.