Timing belt Optibelt 150 AT10 / 8200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 150 AT10 / 8200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 150 AT10 / 8200 AFX and any equivalents.
This Optibelt 150 AT10 / 8200 AFX timing belt is part of the Alpha Flex series. It has an AT10 profile, a 10 mm pitch and an 8200 mm length. We carry it for maintenance, engineering and purchasing teams who need to match an existing drive belt.
To match this belt to the one being replaced, read the marking on the back of the old belt and compare it with the part number above. Check that the profile is AT10, the pitch is 10 mm and the length is 8200 mm. The 150 in the part number indicates the belt width, so the replacement must also be 150 wide to fit the same pulleys and keep the drive aligned.
If the old belt is worn or the marking is unreadable, measure the length along the back of the belt and confirm the profile against the pulley grooves. The AT10 profile and 10 mm pitch must match the pulleys exactly. Send the part number, the belt marking or your measurements and we will confirm the right Optibelt belt or suggest an equivalent.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 8200mm
Frequently asked questions
- How do I match the Optibelt 150 AT10 / 8200 AFX to the belt I am replacing?
- Read the marking on the back of the old belt and compare it with the part number. Confirm the profile is AT10, the pitch is 10 mm and the length is 8200 mm. The 150 indicates the belt width, so the replacement must also be 150 wide.
- What should I send to request a quote for this belt?
- Send the part number 150 AT10 / 8200 AFX, or the marking from your old belt, along with the quantity you need. If the marking is not clear, send the profile, pitch, length and width from your measurements.
- Can you help if the old belt marking is worn off?
- Yes. Measure the length along the back of the belt and check the profile against the pulley grooves. Send those details and we will confirm the correct Optibelt belt or suggest an equivalent.