Timing belt Optibelt 150 AT10 / 5400 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 150 AT10 / 5400 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 150 AT10 / 5400 AFX and any equivalents.
This is an Optibelt Alpha Flex timing belt with the code 150 AT10 / 5400 AFX. It has an AT10 profile, a 5400 mm length and a 10 mm pitch. Before you fit it, inspect the drive so the new belt is not damaged by the parts around it.
Start with the sheaves. Check the tooth flanks for wear, look for corrosion or buildup in the grooves, and confirm the sheaves are clean and free of burrs. A worn or contaminated sheave will wear a new belt quickly. Check the shafts, bearings and tensioner as well, and correct any runout, looseness or misalignment you find before the belt goes on.
Then look at why the old belt came off. Uneven tooth wear, cracking or a glazed back usually points to a drive problem rather than the belt itself. Set the tension to the drive maker's specification and recheck it after the first run-in period.
We carry the Optibelt 150 AT10 / 5400 AFX. To request a quote, send us the part number by WhatsApp or email. If you are unsure of the code, send a photo of the marking on the back of the belt along with the drive details, and we will confirm the belt or suggest an equivalent.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 5400mm
Frequently asked questions
- How do I confirm this is the right belt?
- Read the code on the back of the old belt and compare it with 150 AT10 / 5400 AFX. Check the profile and the length as well. If the marking is worn off, send us a photo and the drive details.
- What should I check before fitting a new belt?
- Inspect the sheaves for worn tooth flanks, corrosion and buildup, and check the shafts, bearings and tensioner for runout, looseness or misalignment. Correct any problems first, then set the tension to the drive maker's specification.
- What do you need to quote this belt?
- Send the part number 150 AT10 / 5400 AFX by WhatsApp or email. If you do not have it, send a photo of the belt marking and the drive details, and we will confirm the belt or suggest an equivalent.