Timing belt Optibelt 150 AT10 / 5200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 150 AT10 / 5200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 150 AT10 / 5200 AFX and any equivalents.
The Optibelt 150 AT10 / 5200 AFX is an Alpha Flex timing belt with an AT10 profile and a 5200 mm length. The 10 mm pitch identifies the tooth spacing for this synchronous belt. Use the profile and length to confirm this belt matches your drive before you request a quote.
The AT10 profile and 5200 mm length are the two dimensions to check first. A timing belt must match the pulley groove profile and the drive center distance, so confirm both against the old belt or the drive documentation. The 10 mm pitch is the distance from one tooth to the next and must match the pulleys.
When you contact us, send the part number 150 AT10 / 5200 AFX and the profile and length from your belt. If you are replacing a belt on a drive that runs more than one belt, note the full set so we can help you confirm the correct belt for each position. We carry the Optibelt Alpha Flex line and can help you match the profile and length to your application.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 5200mm
Frequently asked questions
- What do the profile and length mean on this belt?
- The profile is AT10, which is the tooth shape and pitch. The length is 5200 mm. The pitch is 10 mm, which is the distance from one tooth to the next. These three values must match your drive.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the old belt and compare the profile, pitch and length. If the marking is worn, measure the length and count the teeth, or send us the drive details and we can help you confirm.
- What should I send to request a quote?
- Send the part number 150 AT10 / 5200 AFX, the profile AT10, and the length 5200 mm. If you are replacing a set, include the quantity and the position on the drive. You can send this by WhatsApp or email.