Timing belt Optibelt 150 AT10 / 10000 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 150 AT10 / 10000 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 150 AT10 / 10000 AFX and any equivalents.
This page covers the Optibelt 150 AT10 / 10000 AFX timing belt, an Alpha Flex synchronous belt with an AT10 profile, a 10000 mm length and a 10 mm pitch. Use it to match the belt you are replacing before you send your quote request.
To match this belt, read the marking on the back of the belt you are removing. The part number 150 AT10 / 10000 AFX identifies the profile, the length and the construction. Confirm the profile is AT10 and the length is 10000 mm. The pitch is 10 mm. If the marking is worn or unreadable, measure the belt and count the teeth so the profile and length can be confirmed.
The 150 AT10 / 10000 AFX is a timing belt, also called a synchronous belt. It is built for drives that need the belt and pulleys to stay in step. When you replace it, inspect the pulleys for wear and check the drive alignment. A belt that fails early often points to a pulley or alignment problem rather than the belt itself.
Send the part number 150 AT10 / 10000 AFX, the belt marking, or the profile and length to our team by WhatsApp or email. We carry Optibelt Alpha Flex belts and will confirm the right belt for your drive. If the exact marking is unclear, include photos of the old belt and the drive so we can help you match it.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 10000mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. It should show the Optibelt part number 150 AT10 / 10000 AFX, or the profile AT10 and length 10000 mm. If the marking is gone, measure the belt and count the teeth.
- What does the 10 mm pitch mean for matching?
- The 10 mm pitch is the distance between tooth centers. The replacement belt must have the same AT10 profile and the same 10 mm pitch so it seats correctly in the pulleys.
- What should I send to get a quote?
- Send the part number 150 AT10 / 10000 AFX, or the belt marking, or the profile and length. Photos of the old belt and the drive help us confirm the match. You can send this by WhatsApp or email.