Timing belt Optibelt 14MFP 2800
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega Fan Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 14MFP 2800 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 14MFP 2800 and any equivalents.
The Optibelt 14MFP 2800 is a timing belt in the Omega Fan Power series with an HTD 14M profile and a 2800 mm length. It is used where a synchronous drive must run at a fixed speed ratio. For fans and similar driven equipment, the HTD profile carries the load across the full width of the teeth.
To confirm fit, read the marking on the back of the old belt and match the profile and the length. The profile is HTD 14M and the pitch is 14 mm. The length is 2800 mm. Check that the belt you remove carries the same profile and length before ordering.
Inspect the drive while the belt is off. Look at the pulley grooves for wear or debris, check that the pulleys are aligned, and confirm the tension is set to the drive maker's specification. On a synchronous belt, worn grooves or a misaligned drive will damage a new belt quickly.
When you send your quote request, include the part number 14MFP 2800 and the belt marking. If you are replacing more than one belt on the same drive, send the part numbers for the full set so the belts can be matched.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 2800mm
Frequently asked questions
- How do I confirm the 14MFP 2800 is the right belt for my drive?
- Read the marking on the back of the belt you are replacing. The profile must be HTD 14M and the length must be 2800 mm. The pitch is 14 mm. If the marking matches, the belt is the correct size for that drive.
- What should I check on the drive before fitting a new timing belt?
- Check the pulley grooves for wear or debris, confirm the pulleys are aligned, and set the tension to the drive maker's specification. Correct alignment and tension are what let a synchronous belt run at its rated speed ratio.
- What information do you need to quote the 14MFP 2800?
- Send the part number 14MFP 2800, the belt marking, and the quantity. If the drive uses more than one belt, include the part numbers for the full set so the belts can be supplied as a matched group.