Timing belt Optibelt 14MFP 2590

OPTIBELT 14MFP 2590 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 14MFP 2590 and any equivalents.

The Optibelt 14MFP 2590 is a timing belt in the Omega Fan Power series, built on an HTD 14M profile with a 2590 mm length and a 14 mm pitch. We carry it for maintenance, engineering and purchasing teams who need to match a belt that is already in service. The fastest way to confirm it is the right one is to read the marking on the back of the belt you are replacing and compare it to this part number.

Start with the profile and the length. An HTD 14M profile will not seat correctly on a drive cut for another tooth form, and a belt of a different length will not hold the correct center distance or tension. The 14MFP 2590 is identified by the HTD 14M profile, a 2590 mm length and a 14 mm pitch, so those three values are what to check first against the belt coming off the drive.

If the old belt is worn, dirty or has lost its marking, measure it and note the tooth profile before ordering. Send us the part number from the back of the belt, or the profile, length and pitch you measured, and the team will confirm the Optibelt 14MFP 2590 or point you to the correct belt for the drive.

On drives that run more than one belt, replace the set together so the load stays even across the belts. Inspect the sprockets at the same time for worn teeth, and check alignment and tension before the drive goes back into service.