Timing belt Optibelt 1320 8M 50 HIPO
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega High Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 1320 8M 50 HIPO belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1320 8M 50 HIPO and any equivalents.
This Optibelt 1320 8M 50 HIPO belt is a timing belt in the Omega High Power series. It has an HTD 8M profile, a length of 1320 mm and a pitch of 8 mm. Use these three values to confirm the belt matches your drive before you request a quote.
The profile and length are the primary selection criteria. HTD 8M defines the tooth shape and pitch, while 1320 mm is the datum length. The part number also carries 50, which refers to the belt width in millimeters. If your drive uses an HTD 8M pulley, this belt will seat correctly; if it uses another profile, it will not.
When matching an existing belt, read the marking on the back. Compare the profile, length and width against the data here. If the old belt is worn or the marking is unreadable, measure the pitch and the length along the tooth side and confirm the pulley groove profile.
For a quote, send the part number 1320 8M 50 HIPO, the quantity, and the application details. If you are unsure about the width or need an alternative, include the old belt marking and a photo of the drive.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1320mm
Frequently asked questions
- What do the numbers in 1320 8M 50 HIPO mean?
- The belt is an HTD 8M profile with a length of 1320 mm and a pitch of 8 mm. The 50 indicates the belt width in millimeters. The HIPO designation belongs to the Optibelt Omega High Power series.
- How do I confirm this belt fits my drive?
- Check that your pulleys are HTD 8M and that the required belt length is 1320 mm. Also confirm the width matches your pulley groove. If you have the old belt, compare its markings with the data on this page.
- What information do you need for a quote?
- Send the part number 1320 8M 50 HIPO, the quantity you need, and any details about the drive. If you are replacing a belt, include the old belt marking and a photo of the setup.