Timing belt Optibelt 1320 8M 20 HILO
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega High Load
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 1320 8M 20 HILO belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1320 8M 20 HILO and any equivalents.
The Optibelt 1320 8M 20 HILO is a timing belt from the Omega High Load series, built for drives that need precise synchronization. With an HTD 8M profile, a 1320 mm length and an 8 mm pitch, it fits specific industrial applications. Before fitting, inspect the drive and sheaves to protect the new belt and keep the system running correctly.
A new timing belt will not fix worn or misaligned components. Check the sheaves for tooth wear, cracks, or debris in the grooves. Verify that the sheaves are aligned and that the bearings turn freely. Any damage or misalignment will shorten the life of the Optibelt 1320 8M 20 HILO and may cause the drive to fail again.
Confirm the part number on the old belt matches 1320 8M 20 HILO. The marking on the back of the belt shows the profile and length, so compare it carefully. If the old belt is worn or unreadable, measure the length and count the teeth to confirm the 1320 mm length and 8 mm pitch. The HTD 8M profile must match the sheave grooves exactly.
When you request a quote, send the part number 1320 8M 20 HILO and the quantity you need. If you are replacing belts on a multi-belt drive, note that all belts should be replaced as a set to maintain even tension. Our team can help confirm the right belt for your drive.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1320mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect the sheaves for worn teeth, cracks, or debris, and verify alignment and bearing condition. Correct any issues before fitting the new belt to avoid premature failure.
- How do I confirm the old belt matches the 1320 8M 20 HILO?
- Read the marking on the back of the old belt. It should show the HTD 8M profile and 1320 mm length. If it is unreadable, measure the length and count the teeth to confirm the 8 mm pitch.
- What information do you need to quote this belt?
- Send the part number 1320 8M 20 HILO and the quantity required. If you are replacing multiple belts on one drive, mention that so we can help you plan a complete set.