V-belt Optibelt 13 x 3350 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 13 x 3350 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 13 x 3350 Li and any equivalents.
The Optibelt VB S=C Plus 13 x 3350 Li is a classical V-belt with an A profile, a top width of 13 mm, a height of 8 mm, and a 40-degree angle. Its 3350 mm length is the reference you need when matching an existing drive or specifying a replacement. Use the profile and length together to confirm the belt fits your application.
Profile A sets the cross-section: 13 mm across the top, 8 mm high, with a 40-degree angle. The 3350 mm length is stated as Li, so the belt is identified by its inside length. When you read the marking on the back of an old belt, compare both the profile letter and the length to this data before ordering.
This classical V-belt suits drives that call for an A-profile belt of this length. If you are replacing a belt on a drive with multiple belts, inspect the set and replace them together so the load stays even. Check sheave grooves for wear and confirm the belt sits correctly before tensioning.
To request a quote, send the part number 13 x 3350 Li, the brand Optibelt, and the series VB S=C Plus by WhatsApp or email. If you have the old belt, include a photo of the marking and the drive setup. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 3350mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The profile A gives a top width of 13 mm, a height of 8 mm, and a 40-degree angle. The length is 3350 mm, stated as Li, which is the inside length. Both values must match your drive specification.
- How do I confirm this is the correct replacement?
- Read the marking on the back of the belt you are replacing. Compare the profile letter and the length to 13 x 3350 Li. If the marking is worn, measure the inside length and the top width, and check the sheave groove profile.
- What should I send to request a quote?
- Send the part number 13 x 3350 Li, the brand Optibelt, and the series VB S=C Plus. If you have the old belt, include a photo of the back marking and a note about the drive. The team replies by WhatsApp or email.