V-belt Optibelt 13 x 3250 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 13 x 3250 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 13 x 3250 Li and any equivalents.
The Optibelt VB S=C Plus is a classical V-belt with an A profile, a 13 mm top width and a 3250 mm length. Before you fit a replacement, inspect the drive and sheaves so the new belt runs correctly from the first start.
A worn belt can hide problems in the drive. Check sheave grooves for wear, scoring or buildup, and confirm the sheaves are aligned and securely mounted. Turn the drive by hand where possible and look for damaged bearings or obstructions. Correcting these now helps the replacement belt seat properly and avoids repeating the same failure.
This belt is identified by its marking: Optibelt VB S=C Plus, profile A, 13 x 3250 Li, with a 40-degree angle. The 13 mm top width and 8 mm height match the A profile, and the 3250 mm length is the datum to compare against the belt you are replacing. Confirm the marking on the old belt before ordering.
When you request a quote, send the part number 13 x 3250 Li and the belt marking. If the drive uses multiple belts, note how many are on the set so the replacement can be handled as a matched set. Our team replies promptly by WhatsApp or email and can help confirm the right belt for your drive.
Dimensions
- Section
- A
- Length
- 3250mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect sheave grooves for wear, scoring or buildup, verify alignment and mounting, and check bearings and shafts for damage. Correcting these points helps the new belt run true.
- How do I confirm this is the correct belt for my drive?
- Read the marking on the old belt and compare it with the Optibelt VB S=C Plus, profile A, 13 x 3250 Li. The 13 mm top width, 8 mm height and 3250 mm length should match the belt you are replacing.
- What information should I send with my quote request?
- Send the part number 13 x 3250 Li and the full belt marking. If the drive uses multiple belts, include the number of belts in the set so we can help confirm the right replacement.