V-belt Optibelt 13 x 2667 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 13 x 2667 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 13 x 2667 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with an A profile, a 13 mm top width, an 8 mm height and a 40-degree angle. Its datum length is 2667 mm. Use these dimensions to match the belt you are replacing.
The most reliable way to identify a replacement is to read the marking on the back of the old belt. Confirm the profile is A and the length is 2667 mm. If the old belt is worn or the marking is gone, measure the top width and the outside length, then compare them with the 13 mm top width and 2667 mm length shown here. A belt that is the wrong profile or length will not sit correctly in the pulley grooves.
Before ordering, inspect the drive: check the pulley grooves for wear, look for oil or debris, and confirm the pulleys are aligned. On a multi-belt drive, replace all belts at the same time so the load is shared evenly. If you are unsure whether this Optibelt belt matches your application, send the part number from the old belt, the pulley groove profile, and the center distance between pulleys.
We carry the Optibelt VB S=C Plus line and can help you confirm the right belt or suggest an equivalent. Send your part number by WhatsApp or email, and our team will reply promptly. Provide the belt marking, profile, and length so we can check it against this 13 x 2667 Li belt.
Dimensions
- Section
- A
- Length
- 2667mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the marking on the back of the old belt for the profile and length. This belt has an A profile and a 2667 mm length, with a 13 mm top width, an 8 mm height and a 40-degree angle. If the marking is unreadable, measure the top width and outside length and compare them with these values.
- Can I replace just one belt on a multi-belt drive?
- It is good practice to replace all belts on the drive at the same time. Belts wear together, and mixing a new belt with used ones can cause uneven load sharing. If you are replacing a set, order the same number of belts as the drive uses.
- What information should I send for a quote?
- Send the part number from the old belt, or the profile and length if the marking is gone. Also include the pulley groove profile and the center distance between pulleys if you have it. You can send this by WhatsApp or email, and we will confirm the belt or suggest an equivalent.