V-belt Optibelt 13 x 1956 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 13 x 1956 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 13 x 1956 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with an A profile, a top width of 13 mm, a height of 8 mm, and a 40-degree angle. Its datum length is 1956 mm. The marking 13 x 1956 Li on the belt identifies the cross-section and length you need to match.
When you read the back of an old belt, the profile letter and the length number are the two values that decide whether a replacement will sit correctly in the pulley groove. Here the profile is A, the top width is 13 mm, the height is 8 mm, and the angle is 40 degrees. The length is 1956 mm, listed as 13 x 1956 Li. Confirm those figures against the belt you are replacing before you request a quote.
This is a classical V-belt from the Optibelt VB S=C Plus series. It is not a narrow wedge belt, cogged belt, timing belt, Poly-V belt, double-V belt, banded belt, variable speed belt, or CVT belt. If the drive runs more than one belt, inspect every belt in the set for matching profile, length, and wear, and replace the set together when they no longer match.
To get a quote, send the part number 13 x 1956 Li and the brand Optibelt by WhatsApp or email. If you are unsure about the profile or length, send a photo of the marking on the back of the belt and the pulley grooves. The team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 1956mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The profile A gives a top width of 13 mm, a height of 8 mm, and a 40-degree angle. The length is 1956 mm, shown in the part number as 13 x 1956 Li. Match both the profile and the length to the belt you are replacing.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt. If it shows an A profile and 1956 mm length, this Optibelt VB S=C Plus belt matches those figures. You can also send a photo of the marking and the pulleys for confirmation.
- What should I send to request a quote?
- Send the part number 13 x 1956 Li and the brand Optibelt by WhatsApp or email. If you are replacing a set, include the quantity of belts on the drive so the team can help you match the set.