V-belt Optibelt 13 x 1930 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 13 x 1930 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 13 x 1930 Li and any equivalents.
The Optibelt VB S=C Plus is a classical V-belt in profile A with a 13 mm top width, 8 mm height and a 40 degree angle. This listing is for the 13 x 1930 Li size, which we carry for maintenance and replacement work. The most reliable way to order is to match it against the belt you are removing.
Start with the belt on the drive. Read the marking printed on the back of the old belt and compare it to this one: profile A, 13 mm top width, 8 mm height, 1930 mm length, 40 degree angle. If the old marking is faded or the belt is damaged, measure the top width and the outside length so the profile and length can be confirmed before you order.
Profile and length are the two figures that decide fit. A belt that is too narrow sits low in the groove and slips; one that is too wide rides high and wears the flanks. Check the sheave grooves for wear, oil or debris at the same time, and confirm that the drive takes a single classical V-belt rather than a banded or synchronous design.
Send the part number 13 x 1930 Li, or the marking from the old belt, by WhatsApp or email and the team will confirm the right belt or suggest an equivalent. Photos of the back marking and of the sheave grooves help when the printing is no longer legible.
Dimensions
- Section
- A
- Length
- 1930mm
Frequently asked questions
- How do I confirm this is the correct belt for my drive?
- Compare the marking on the old belt with the data here: profile A, 13 mm top width, 8 mm height, 1930 mm length and 40 degree angle. If the marking is unreadable, measure the top width and outside length and send those figures with a photo.
- What should I send to request a quote?
- Send the part number 13 x 1930 Li, or the full marking from the belt being replaced, by WhatsApp or email. If you are unsure of the size, include the measured top width and length and a photo of the back of the belt.
- Does the belt come in other sizes?
- This page covers the 13 x 1930 Li size in profile A. If your drive uses a different length or profile, send the marking or measurements and the team will check what matches.