Timing belt Optibelt 115 / 14M 6594 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 115 / 14M 6594 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 115 / 14M 6594 AFX and any equivalents.
This Optibelt Alpha Flex belt is a timing belt in the HTD 14M profile with a length of 6594 mm and a 14 mm pitch. The part number 115 / 14M 6594 AFX identifies the belt, so the profile and the length are the two values to check first against the drive you are replacing.
The profile sets how the belt sits in the pulleys. HTD 14M is a synchronous profile, so the teeth carry the drive rather than friction, and the 14 mm pitch is the spacing between tooth centers. The 6594 mm length is the value to match against the old belt or the drive layout. If the profile and the length are right, the belt is the correct size for that position.
The cleanest way to confirm a replacement is to read the marking on the back of the belt that is coming off. If the marking matches 115 / 14M 6594 AFX, the size is confirmed. If the marking is worn or unreadable, measure the old belt and note the profile and length, then send those details with your request.
For a quote, send the part number 115 / 14M 6594 AFX, the quantity you need, and the drive or equipment it goes on. If you are replacing more than one belt on the same drive, list every position so the set can be quoted together. We carry Optibelt and can confirm the belt or suggest an equivalent from the details you send.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 6594mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The HTD 14M profile tells you the tooth shape and the 14 mm pitch, which must match the pulleys. The 6594 mm length tells you the belt size around the drive. Both values need to match the belt being replaced.
- How do I confirm this is the right belt before ordering?
- Read the marking on the back of the old belt and compare it with 115 / 14M 6594 AFX. If the marking is not readable, measure the old belt and note the profile and length, then send those details with your request.
- What should I send to get a quote?
- Send the part number 115 / 14M 6594 AFX, the quantity, and the drive or equipment it is used on. If several belts on the same drive are being replaced, list each position so the whole set can be quoted.