Timing belt Optibelt 115 / 14M 6398 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 115 / 14M 6398 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 115 / 14M 6398 AFX and any equivalents.
The Optibelt 115 / 14M 6398 AFX is an Alpha Flex timing belt in the HTD 14M profile, with a 6398 mm length and a 14 mm pitch. It is the belt to reach for when you are replacing a worn synchronous belt on a drive and need the replacement to match the original. The most reliable way to confirm the match is to read the marking on the back of the belt you are removing.
Before you order, pull the old belt and compare its back marking against this one. The code 115 / 14M 6398 AFX should appear on the belt, or the profile and length should be legible as HTD 14M and 6398 mm. If the marking has worn off, measure the length and check the profile against the pulley grooves: an HTD 14M belt seats in a 14 mm pitch groove. A belt that is close but not exact will not run correctly.
On a synchronous drive, the belt, pulleys and tensioner wear together. If the drive runs more than one belt, replace the set rather than one belt, and inspect the pulley teeth for wear or damage while the belt is off. Send the full code, 115 / 14M 6398 AFX, along with the profile and length, and we will confirm the belt or point you to an equivalent.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 6398mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the belt being replaced. If it matches 115 / 14M 6398 AFX, or reads as HTD 14M with a 6398 mm length, it is the same belt. If the marking is gone, check the profile against the pulley grooves and measure the length.
- What do I need to send for a quote?
- Send the part number 115 / 14M 6398 AFX, or the profile and length if the number is unreadable. A photo of the back marking and the drive helps us confirm the match.
- Should I replace more than one belt at a time?
- If the drive uses multiple belts, replace them as a set. Belts that have run together wear together, and mixing a new belt with worn ones can affect how the drive runs.