Timing belt Optibelt 100 T5 / 8800 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 T5 / 8800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 T5 / 8800 AFX and any equivalents.
The Optibelt 100 T5 / 8800 AFX is an Alpha Flex timing belt with a T5 profile, an 8800 mm length and a 5 mm pitch. Before you fit it, inspect the drive and the sheaves, because a worn or misaligned pulley will shorten the life of any new belt.
Check the sheaves for worn grooves, burrs, corrosion and build-up in the tooth spaces, and confirm the pulleys run true and align with each other. Look at the shaft bearings, the tensioner and any idler for play, rough rotation or damaged surfaces, and correct anything you find before the belt goes on.
Clean the drive, then fit the belt without forcing it over the flanges or prying it with a tool. Tension it to the drive manufacturer's specification, rotate the drive by hand through a few full turns, and recheck the tension and the tracking before the drive is put back into service.
For a quote, send the part number 100 T5 / 8800 AFX, or the marking on the back of the old belt, by WhatsApp or email. If the number is unreadable, send the profile, the length and the width, and the team will confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- T5
- Pitch
- 5mm
- Length
- 8800mm
Frequently asked questions
- What are the profile, length and pitch of this belt?
- It is a T5 profile timing belt with a length of 8800 mm and a pitch of 5 mm.
- What should I check before fitting this belt?
- Inspect the sheaves for wear, burrs, corrosion and material in the tooth spaces, check alignment and runout, and examine the bearings, tensioner and idlers for play or rough rotation. Correct any fault before fitting the new belt.
- How do I request a quote for this belt?
- Send the part number 100 T5 / 8800 AFX by WhatsApp or email. If the marking on the old belt is worn, send the profile, length and width instead and the team will confirm the right belt or suggest an equivalent.