Timing belt Optibelt 100 T5 / 8200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 T5 / 8200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 T5 / 8200 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 100 T5 / 8200 AFX. It uses a T5 profile with a 5 mm pitch and an 8200 mm length. Use these three specifications to confirm the belt matches your drive before you request a quote.
Timing belts in this class are common on drives where synchronization between shafts must be maintained. The T5 profile and 5 mm pitch define the tooth geometry, while the 8200 mm length sets the belt's path around the pulleys. Confirm all three values against the marking on your existing belt or the drive documentation.
To match the old belt, read the back of the belt and compare the profile, pitch and length to the values here. If the marking is worn or unreadable, measure the length along the belt's path and count the teeth to verify the pitch. Send the part number or your measurements and we will help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- T5
- Pitch
- 5mm
- Length
- 8200mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the profile, pitch and length against the marking on your existing belt or your drive documentation. This belt is T5 profile, 5 mm pitch and 8200 mm length.
- What should I send to request a quote?
- Send the part number 100 T5 / 8200 AFX, or the profile, pitch and length from your old belt. Photos of the back marking also help.
- Can you help if my current belt marking is unreadable?
- Yes. Measure the length along the belt path and count the teeth to confirm the pitch, then send those values. We will help identify the correct belt or an equivalent.