Timing belt Optibelt 100 / 5M 9800 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 / 5M 9800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 / 5M 9800 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 100 / 5M 9800 AFX. It uses the HTD 5M profile with a 5 mm pitch and a length of 9800 mm. Timing belts in this profile and length range are commonly used on long-span, low-to-medium power synchronous drives where positive engagement is required.
To confirm fit, match the belt marking on the back of the existing belt to the code 100 / 5M 9800 AFX. Verify the profile is HTD 5M, the pitch is 5 mm and the length is 9800 mm. Check the driven and driving pulleys for the same profile and pitch before ordering.
Inspect the drive for worn pulley teeth, misalignment, correct tension and any debris or contamination that could affect belt life. Replace the belt if there is cracking, fraying, missing teeth or exposed tensile cords. On multi-belt drives, replace all belts at the same time to keep loads even.
For a quote, send the full part number, the profile and the length, along with the quantity required. If the marking is worn, provide the pulley tooth count and the center distance so the correct belt can be identified. We carry Optibelt belts and can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 9800mm
Frequently asked questions
- How do I confirm this is the correct belt for my drive?
- Read the marking on the back of the old belt and compare it to 100 / 5M 9800 AFX. Confirm the profile is HTD 5M, the pitch is 5 mm and the length is 9800 mm. Also check that the pulleys are HTD 5M with a 5 mm pitch.
- What should I check on the drive before replacing the belt?
- Inspect the pulleys for worn or damaged teeth, check alignment and tension, and remove any debris or contamination. If the belt shows cracking, fraying, missing teeth or exposed cords, replace it. On drives with multiple belts, replace them as a set.
- What information do you need to quote this belt?
- Send the full part number 100 / 5M 9800 AFX, the HTD 5M profile, the 9800 mm length and the quantity. If the marking is not readable, provide the pulley tooth count and center distance so we can help identify the belt.