Timing belt Optibelt 100 / 5M 10200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 / 5M 10200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 / 5M 10200 AFX and any equivalents.
The Optibelt 100 / 5M 10200 AFX is a timing belt from the Alpha Flex series. It uses the HTD 5M profile with a 5 mm pitch and a 10200 mm length. This page helps you match it to the belt you are replacing.
When a timing belt is worn or damaged, the fastest way to confirm the correct replacement is to read the marking on the back of the old belt. Look for the profile, pitch and length. For this Optibelt belt, the marking shows 100 / 5M 10200 AFX. The profile is HTD 5M, the pitch is 5 mm and the length is 10200 mm. Compare those three values with your old belt. If they match, this is the correct belt for the drive.
If the marking is faded or missing, measure the old belt. Count the teeth and measure the pitch to identify the profile. Check the length against the 10200 mm figure. The 5M profile is a common HTD size, but the length must be exact. Do not substitute a different length. A belt that is too short or too long will not tension correctly and can damage the drive.
For a quote, send the part number 100 / 5M 10200 AFX by WhatsApp or email. If you are unsure, send a photo of the old belt marking and the drive setup. The team can confirm the right belt or suggest an equivalent. We carry Optibelt belts and can help you match the profile and length to your application.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 10200mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the marking on the back of the old belt. It should show the profile, pitch and length. This belt is HTD 5M, 5 mm pitch, 10200 mm length. If your old belt shows the same values, it is the correct replacement.
- What if the marking on my old belt is unreadable?
- Measure the pitch and count the teeth to identify the profile. Measure the length and compare it to 10200 mm. If you are unsure, send a photo of the old belt and the drive to the team for confirmation.
- Can I use a different length belt if the profile matches?
- No. The length must match exactly. A different length will not tension correctly and can cause drive problems. Always use the specified 10200 mm length for this belt.