Industrial pulley 360 mm, 2 grooves, section B

EMMAR POLEA 360 2B belongs to pulleys, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for POLEA 360 2B and any equivalents.

For drives that need to split power across two V-belt runs, the EMMAR pulley with a 360 mm outside diameter and two section B grooves is a practical choice. It mounts on a shaft and transfers motion from the motor to the driven equipment. EMMAR builds this pulley in its own production, so you get a component made to consistent tolerances.

The part number MR-POLEA-B2-360 and the shorthand POLEA 360 2B both point to the same item: 360 mm across the outside, two grooves, section B belt profile. Reading the code is straightforward—the first figure gives the diameter, the 2B tells you the groove count and belt section. That makes it easy to cross-check against the pulley you are replacing or the one specified in your drive design.

Two grooves let you run two belts side by side, which suits equipment where a single belt would not carry the load. You will find this size on machine tools, compressors, centrifugal pumps, industrial fans and conveyors. In each case the pulley sets the speed and torque relationship between the motor and the machine it drives.

Before ordering, confirm the shaft diameter, that the belt is section B, the power the drive must transmit and the operating speed. Alignment between the driving and driven pulleys matters, and so does correct belt tension—both affect how long the belts and the pulley grooves last. Use the right tools for mounting and follow the safety instructions for the job.

If the 360 mm size or the two-groove configuration does not match your setup, EMMAR can produce a custom pulley. The team can also help you identify an equivalent for your application. Send the part number MR-POLEA-B2-360 or the designation POLEA 360 2B by WhatsApp or email and you will get a prompt reply.