Double sprocket with hub, pitch 5/8", 38 teeth
- Brand
- MR
- Category
- Power transmission
- Subcategory
- Sprockets and gears
- Series
- paso 5/8"
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MR Piñón doble 5/8" Z38 belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for Piñón doble 5/8" Z38 and any equivalents.
This double sprocket with hub runs on 5/8" pitch chain and carries 38 teeth. It is made of SAE 1045 steel and mounts on a shaft to drive two chains, either side by side or in separate planes. The hub is the mounting point, so the sprocket can be fixed with a key or a set screw. Maintenance and purchasing teams use it when a single shaft has to feed two chains or when the output of a reducer needs to be duplicated.
The part number is MR-PINON-DOBLE-5-8-Z38. The 5/8" pitch matches ANSI 50 chain, and the 38 teeth set the ratio. Because it is a double sprocket, it has two toothed rings on one body. The hub lets you mount it directly on the shaft, with a keyway or a set screw as required. MR supplies it with the machining and material treatment needed for a correct fit with the chain.
You will find this sprocket in production lines, conveyors, packaging equipment, agricultural machinery and lifting systems. It also appears in machine tools and material handling equipment that run 5/8" pitch chain. Typical setups are those where motion goes to two shafts at once or where extra reduction is needed.
When selecting the sprocket, check the chain pitch, the number of teeth, the shaft diameter and the fastening method. Confirm that the hub bore and the keyway match the shaft. Alignment between sprockets and chains matters to avoid premature wear. If you need a different ratio, we can source the number of teeth you require.
For a variant with another tooth count, pitch or hub diameter, contact us. We can also source special parts from a sample or drawing. To request an equivalent, send the current part number, the number of teeth and the chain pitch. With that data we will quote the most convenient option.
To request a quote for this double sprocket 5/8" Z38 or ask about a variant, write to us via WhatsApp or email. Send the part number MR-PINON-DOBLE-5-8-Z38 and we will reply promptly.
Dimensions
- Pitch
- 5/8"
- Teeth (z)
- 38
- Material
- SAE 1045 steel
- Type
- Double sprocket with hub
Frequently asked questions
- What does "double sprocket with hub" mean?
- It means the sprocket has two toothed rings on a single body and a central hub for mounting on the shaft. This allows you to drive two chains at the same time or duplicate the output of a reducer.
- Which chain does this sprocket use?
- The 5/8" pitch corresponds to ANSI 50 chain. Check that your chain is that pitch to ensure correct engagement and avoid premature wear.
- Can I request a different size?
- Yes. We can source sprockets with a different number of teeth, pitch or hub diameter. Send the data via WhatsApp or email and we will quote the variant you need.