Double sprocket with hub, pitch 5/8", 37 teeth
- Brand
- MR
- Category
- Power transmission
- Subcategory
- Sprockets and gears
- Series
- paso 5/8"
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MR Piñón doble 5/8" Z37 belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for Piñón doble 5/8" Z37 and any equivalents.
When two chain strands have to run side by side off one shaft, this double sprocket covers the job. It carries a 5/8" pitch and 37 teeth (z=37), machined in SAE 1045 steel, and it comes with a hub. MR supplies it, so the bore and keyway can be machined to suit the shaft on your machine.
The part is a double sprocket with hub, 5/8" pitch, 37 teeth, in SAE 1045 steel. Two toothed rings share one body, so a single sprocket can either duplicate a drive or keep two strands synchronized. The hub gives the sprocket more bearing length on the shaft, which helps spread the load and hold alignment when the load is not evenly balanced.
Typical locations are chain conveyors, bucket elevators, motorized roller tables and packaging lines where two chains run in parallel. The same item shows up on agricultural machinery and on process equipment built around 5/8" pitch that needs a hub for a firm shaft mounting. Because MR supplies it, the bore and keyway can be machined to different shaft sizes while the tooth geometry stays as is.
When selecting, confirm the chain pitch is 5/8" and count the teeth on the sprocket being replaced. A different tooth count changes the transmission ratio and the output speed. Check the shaft diameter and the hub length the machine allows, since the fit depends on both. At assembly, line up the two chains with a straightedge or dial indicator, set the tension and lubricate for the working conditions so wear stays even.
If this exact sprocket does not fit, an equivalent can be requested: another tooth count within the same 5/8" pitch, or a hub variant bored for a different shaft diameter. Send the current part number, a photo of the mounted part and the shaft dimensions, and the technical team reviews which alternative fits best.
To request a quote for this double sprocket 5/8" Z37, send the part number MR-PINON-DOBLE-5-8-Z37 by WhatsApp along with the quantity and, if available, the shaft and keyway dimensions. The quote then comes back with the right configuration from the start.
Dimensions
- Pitch
- 5/8"
- Teeth (z)
- 37
- Material
- SAE 1045 steel
- Type
- Double sprocket with hub
Frequently asked questions
- What does "double sprocket with hub" mean?
- The body carries two toothed rings with the same pitch and tooth count, mounted on a central hub. The hub sits on the shaft and lets the sprocket be secured with a key or a screw, depending on the design. It is used when two chains must be driven in parallel from one point.
- Can I order a different tooth count or shaft diameter?
- Yes. Since MR supplies it, variants within the 5/8" pitch can be reviewed, with another tooth count or with the hub bored for a different shaft. Send the current part number and your shaft dimensions by WhatsApp so the technical team can check the alternative.
- How do I confirm this sprocket replaces the one I have?
- Compare the chain pitch, the tooth count and the shaft diameter at the hub. If pitch and teeth match, the transmission ratio stays the same. If the tooth count differs, the output speed changes. When in doubt, send a photo and the dimensions by WhatsApp.