Double sprocket with hub, pitch 5/8", 34 teeth

MR Piñón doble 5/8" Z34 belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for Piñón doble 5/8" Z34 and any equivalents.

The MR-PINON-DOBLE-5-8-Z34 is a double sprocket with hub, 5/8" pitch, 34 teeth, made of SAE 1045 steel. It is supplied by MR Industrial Accessories LLC for power transmission systems that require two chains to run in parallel on the same shaft, either to duplicate output or to synchronize two transmission lines. The double row with hub means two toothed crowns are integral to a central hub that mounts on the shaft. If you are replacing a worn sprocket or building a new drive, send the part number and our team will provide a quote.

The designation MR-PINON-DOBLE-5-8-Z34 breaks down as follows: 5/8" is the chain pitch, Z34 indicates 34 teeth, and "double" refers to the two rows of teeth on a common hub. The 5/8" pitch is a common size in medium-duty roller chain drives, and the 34-tooth count determines the transmission ratio together with the mating sprocket or wheel. SAE 1045 carbon steel gives the sprocket the strength and wear resistance needed for continuous service in industrial environments.

Typical applications include belt and roller conveyors, elevators, packaging machinery, material handling equipment, and general transmission mechanisms where two chain runs must be synchronized or where two outputs are required from one shaft. It can also be found in gear reducers and transmission boxes that need dual outputs or the coupling of two chains on the same shaft. MR supplies this sprocket and can help adapt it to your equipment within the available possibilities.

When selecting or mounting this double sprocket, consider the chain pitch (5/8"), the number of teeth (34), and the shaft diameter where the hub fits. Verify alignment between the sprocket and the driven wheel, as well as chain tension and lubrication. Because it is a double sprocket, both chains must operate with equal tension to prevent uneven loading. If the shaft is keyed, the hub must have a matching keyway. Proper axial fixing and a correct fit of the hub on the shaft are essential to avoid vibration and premature wear.

For an equivalent or replacement, send the part number MR-PINON-DOBLE-5-8-Z34 or the details of your current setup: pitch, number of teeth, hub type, and shaft diameter. With that information, we can suggest an alternative in the same series or help source a custom part. We can also assist if the original sprocket has no visible brand or if you need to change the tooth count to modify the transmission ratio.

To request a quote for this double sprocket 5/8" Z34, contact us via WhatsApp or email with the part number. MR Industrial Accessories LLC supplies power transmission, bearing, and industrial accessory products to customers across the United States and in several Latin American countries. Our team responds promptly and can help you choose the right component or suggest equivalents.