Double sprocket with hub, pitch 5/8", 33 teeth
- Brand
- MR
- Category
- Power transmission
- Subcategory
- Sprockets and gears
- Series
- paso 5/8"
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MR Piñón doble 5/8" Z33 belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for Piñón doble 5/8" Z33 and any equivalents.
This double sprocket with hub is designed for power transmission through roller chains. With a 5/8" pitch and 33 teeth, it allows two chains to run in parallel from a single shaft point, which is useful for synchronizing movements or duplicating output. Supplied by MR in SAE 1045 steel, it is built for continuous industrial use and requires proper alignment during installation.
The sprocket is defined by its 5/8" pitch and 33 teeth. The pitch determines the chain it fits, while the tooth count sets the transmission ratio and tangential speed. It is made from SAE 1045 carbon steel, known for good machinability and strength, making it suitable for general-purpose sprockets. The double-with-hub construction means two toothed rings are integrated into a central hub for shaft mounting. Its commercial designation is Double sprocket 5/8" Z33.
Common uses for a double sprocket with hub include transmission lines that need to drive two chains simultaneously, such as double-chain conveyors, packaging equipment, lifting devices, and drag systems in industrial facilities. It is also chosen when power must be split into two synchronized branches. As supplied by MR, the hub and bore machining can be adjusted to meet equipment requirements, within the factory's capabilities.
During installation, confirm the chain pitch is exactly 5/8" and the tooth count matches the required ratio. Check alignment with the driven sprockets; angular or parallel misalignment speeds up wear on both teeth and chain. Inspect the keyway and shaft condition, and use the correct fastening method to prevent axial play in the hub. Proper lubrication and correct chain tension help extend the life of the assembly.
For an equivalent sprocket, the most efficient approach is to provide the full part number, tooth count, and chain pitch. With that information, we can suggest an alternative in the same series or discuss a custom-made part. It also helps to share the bore diameter and the fastening type used on your equipment, so the replacement fits without additional machining. Contact us via WhatsApp for a prompt reply with the best option.
MR Industrial Accessories LLC supplies power transmission components for maintenance and replacement. If this double sprocket 5/8" Z33 is what you need, send the part number via WhatsApp or email for a quote. If you are unsure about size, tooth count, or pitch, ask us and we will help you identify the correct part.
Dimensions
- Pitch
- 5/8"
- Teeth (z)
- 33
- Material
- SAE 1045 steel
- Type
- Double sprocket with hub
Frequently asked questions
- What does "double with hub" mean?
- It means the sprocket has two toothed rings on a single hub. This allows one part to engage two chains in parallel, which is helpful for synchronizing movements or duplicating a shaft's output.
- How can I tell if this sprocket will replace the one I have?
- Compare the chain pitch, number of teeth, and bore diameter. If they match, it is a direct candidate. If not, send us the details via WhatsApp and we will evaluate making one to your specifications.
- What maintenance does it require?
- Check alignment, chain tension, and lubrication regularly. A misaligned sprocket or a loose chain wears faster. Also inspect the keyway and the hub's fit on the shaft to prevent play.