Double sprocket with hub, pitch 5/8", 17 teeth
- Brand
- MR
- Category
- Power transmission
- Subcategory
- Sprockets and gears
- Series
- paso 5/8"
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MR Piñón doble 5/8" Z17 belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for Piñón doble 5/8" Z17 and any equivalents.
The double sprocket 5/8" Z17, part number MR-PINON-DOBLE-5-8-Z17, is a transmission component for 5/8" pitch chains. It is made of SAE 1045 steel and features a hub that allows mounting on a shaft and connecting to other drive parts. With 17 teeth and a double row, it can drive two chains from one point or change the direction of rotation in a compact setup.
The sprocket has a 5/8" pitch and 17 teeth. Its double configuration means two chain rings are combined on a single hub, which is useful when you need to transmit motion to two chains or alter the transmission ratio at one location. The SAE 1045 steel construction provides wear resistance and toughness for general industrial use.
Common applications include chain conveyors, agricultural machinery, lifting equipment, and production line drives. You will also find it in mechanisms that need to duplicate a shaft output, such as double-chain drives or certain conveyor belts. The 5/8" pitch matches ANSI 40 chain, so it is often used in equipment already set up for that standard.
When selecting this sprocket, check the chain pitch, the number of teeth, and the shaft diameter. The hub can be fixed with a key or set screw, depending on your design. Proper alignment between sprocket and chain is important to avoid premature wear. If you need a different ratio, other tooth counts within the same pitch are available.
For an equivalent, send the exact part number of the sprocket you are replacing, along with a photo or the shaft and chain dimensions. With that information we can confirm if this model fits or if a variant is better. We can also advise on lubrication and tensioning to help extend the service life of the assembly.
To request a quote for the double sprocket 5/8" Z17 or ask about other sizes, send part number MR-PINON-DOBLE-5-8-Z17 via WhatsApp or email. Our team replies promptly with the technical information you need for your application.
Dimensions
- Pitch
- 5/8"
- Teeth (z)
- 17
- Material
- SAE 1045 steel
- Type
- Double sprocket with hub
Frequently asked questions
- Is this sprocket suitable for ANSI 40 chain?
- Yes, the 5/8" pitch corresponds to ANSI 40 chain. Check that the number of teeth and shaft diameter match your equipment. If you are unsure, send us the dimensions and we will advise.
- Can it be mounted on a 25 mm shaft?
- The sprocket comes with a hub, but the bore diameter depends on each application. To confirm the shaft size, tell us the exact diameter. We can supply a made-to-measure bore.
- What lubrication do you recommend for this sprocket?
- For 5/8" pitch chains and sprockets, periodic lubrication with good quality oil or grease is recommended. Frequency depends on speed and load. Avoid lack of lubricant, which accelerates wear of teeth and bushings.