Double sprocket with hub, pitch 5/8", 15 teeth

MR Piñón doble 5/8" Z15 belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for Piñón doble 5/8" Z15 and any equivalents.

This double sprocket with hub from EMMAR is made in SAE 1045 steel with a 5/8" pitch and 15 teeth. It drives two chains in parallel from one shaft, keeping both runs synchronized. The hub mounts directly on the shaft, and the 5/8" pitch matches ANSI 40 chain.

The part number MR-PINON-DOBLE-5-8-Z15 covers a double sprocket with hub, 5/8" pitch and 15 teeth. The hub is the central section that fits on the shaft, and the double configuration means two toothed rings are aligned side by side to engage two chains at once. Use it with 5/8" pitch chain, equivalent to the ANSI 40 series.

You will find this sprocket in equipment that needs motion sent to two chain lines at the same speed and relative position: double-chain conveyors, chain elevators, hauling systems, feed and discharge units, and general transmission mechanisms. It also appears in agricultural implements and production lines with two chain runs.

When selecting, confirm the chain pitch (5/8"), the tooth count (15) and the shaft diameter at the hub. Check that your chain matches the pitch and that the hub bore and fastening method suit the shaft. If you need a keyway, set screw or other fastening, include that in your inquiry so the part can be prepared accordingly.

For a different tooth count, pitch or hub, ask for an equivalent. Send the part number MR-PINON-DOBLE-5-8-Z15 or the full designation by WhatsApp, along with the shaft and chain data. The team will verify compatibility and suggest the variant that fits your equipment.