Double sprocket with hub, pitch 5/8", 11 teeth

MR Piñón doble 5/8" Z11 belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for Piñón doble 5/8" Z11 and any equivalents.

For drives that need to run two chain strands from one shaft, this duplex sprocket with hub offers a compact solution. It has a 5/8" pitch and 11 teeth, and is made of SAE 1045 steel. The part number is MR-PINON-DOBLE-5-8-Z11.

The duplex sprocket 5/8" Z11 consists of two toothed crowns on a single central hub. This arrangement lets one shaft drive two chains of the same pitch, which is useful when you need to synchronize two lines or when there is no room for two separate sprockets. The hub can be secured with a key, a set screw, or both.

SAE 1045 is a carbon steel that machines well and offers good strength, making it suitable for cutting teeth and for heat treatment later if the application calls for it. The 5/8" pitch matches ANSI 50 chain. Typical uses include roller conveyors, bucket elevators, seeders, harvesters, mixers, packaging lines, and other dual-drive systems.

When selecting this sprocket, confirm that the chain pitch is 5/8" and that 11 teeth give the transmission ratio you need. Check that the hub fits the shaft diameter and that the fastening method is correct. Also verify alignment between sprocket and chain, proper tension, and lubrication. If the drive sees variable loads or reversals, consider heat treatment of the teeth.

If you need a different tooth count, another pitch, or a hub with different dimensions, ask about an equivalent. MR manufactures split plummer block housings, ANSI chains, and sheaves, and supplies bearings, seals, bushings, mounting tools, and lubricants. Send the part number MR-PINON-DOBLE-5-8-Z11 or the full designation by WhatsApp or email, and the team will reply promptly with a quote and can help you choose the right part.