Double sprocket with hub, pitch 5/8", 10 teeth

MR Piñón doble 5/8" Z10 belongs to sprockets and gears, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for Piñón doble 5/8" Z10 and any equivalents.

This double sprocket with hub has a 5/8" pitch and 10 teeth (z=10), and is made of SAE 1045 steel. Its two rows of teeth on a common hub let you run two chains in parallel on the same shaft or duplicate the drive, which is useful when movements must be synchronized. The part number to reference is MR-PINON-DOBLE-5-8-Z10.

The designation Double sprocket 5/8" Z10 tells you the chain pitch, the tooth count and the double-row configuration with hub. The 5/8" pitch matches roller chains of that size. The 10 teeth set the ratio together with the driven wheel. The hub mounts on the shaft using the appropriate fixing method.

You will find this sprocket in chain drives on agricultural machinery, conveyors, lifting equipment and production lines where two chains run at once or shafts need to stay in sync. It also suits implements that call for few teeth to reduce speed or multiply torque, as long as the load stays within what the 5/8" pitch allows.

When selecting, confirm the chain pitch is 5/8", that 10 teeth give the ratio you need, and that the shaft diameter fits the hub. Check alignment between sprocket and wheel, chain tension and lubrication. In dusty or humid conditions, consider the steel type and any available surface treatment.

If you need a different tooth count or hub configuration, send the part number MR-PINON-DOBLE-5-8-Z10 or the full designation via WhatsApp. We can also suggest an equivalent from another source if that is what you are after.

To request a quote for this double sprocket 5/8" Z10, message us on WhatsApp with the part number and the quantity. MR Industrial Accessories supports workshops, plants and maintenance teams with technical advice, and the quote is prepared according to the size and application.