V-belt Movendis PP-XPZ1512-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPZ
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-XPZ1512-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPZ1512-EPDM-AS and any equivalents.
The Movendis PP-XPZ1512-EPDM-AS is a cogged narrow V-belt in the XPZ profile with a length of 1512 mm. It is part of the PowerPlus EPDM Cogged Raw Edge Narrow series. Before fitting this belt, inspect the drive and sheaves to confirm they are ready for a new belt.
Check sheave grooves for wear, rust, or embedded debris. Worn grooves can prevent the belt from seating correctly and may cause slipping or rapid wear even when the belt itself is new. Confirm that sheaves are aligned and that the drive is free of obstructions.
Verify that the old belt's marking matches the XPZ profile and 1512 mm length. The PP-XPZ1512-EPDM-AS is a cogged narrow V-belt, and its raw edge construction is intended for drives where a standard wrapped belt may not provide the required grip. If the drive uses multiple belts, replace them as a set to maintain even load sharing.
When requesting a quote, send the part number PP-XPZ1512-EPDM-AS and the quantity needed. If you are unsure whether this belt fits your drive, include the sheave diameters and the center distance so the team can help confirm the correct belt.
Dimensions
- Section
- XPZ
- Length
- 1512mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear, rust, or debris, and confirm that sheaves are aligned. A worn or misaligned drive can shorten belt life even if the belt is correct.
- How do I identify the belt I need?
- Look for the marking on the back of the old belt. The PP-XPZ1512-EPDM-AS is an XPZ profile belt with a length of 1512 mm. If the marking is unreadable, measure the length and note the profile.
- Can I replace just one belt on a multi-belt drive?
- On drives that use multiple belts, replace them as a set. Mixing a new belt with used belts can lead to uneven tension and load sharing.