V-belt Movendis PP-XPZ1500-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPZ
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-XPZ1500-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPZ1500-EPDM-AS and any equivalents.
This Movendis belt is a cogged narrow V-belt in the XPZ profile with a 1500 mm length. The profile and length are the two dimensions that decide whether it fits your drive, so start there when comparing it to the belt you are replacing.
The XPZ profile sets the cross-section that runs in the pulley groove, and 1500 mm sets the length around the drive path. A cogged narrow V-belt of this type is used where a compact, higher-capacity drive calls for a narrow cross-section rather than a classic V-belt. If your drive was built around an XPZ section, this is the profile family to match.
The most reliable check is the marking on the back of the belt you are removing. Read the profile and the length together, not one without the other, because a belt of the same profile in a different length will not tension correctly. If the marking is worn or unreadable, measure the old belt and send those figures with your request.
Send the part number PP-XPZ1500-EPDM-AS by WhatsApp or email to request a quote. If you are unsure whether this is the right belt, include the old belt marking or its measured profile and length, and the team can confirm the match or suggest an equivalent.
Dimensions
- Section
- XPZ
- Length
- 1500mm
Frequently asked questions
- What do the XPZ profile and 1500 mm length mean for my drive?
- XPZ is the cross-section that must match your pulley groove, and 1500 mm is the length around the drive. Both need to match the belt being replaced.
- How do I confirm this is the correct belt?
- Check the marking on the back of the old belt for the profile and length. If it reads XPZ and 1500 mm, this belt matches those figures.
- What should I send to request a quote?
- Send the part number PP-XPZ1500-EPDM-AS by WhatsApp or email. If you are unsure of the match, include the old belt marking or its measured profile and length.