Skip to main content
All products
Movendis logo · MOVENDIS PP-XPA1557-EPDM-AS
V-belt Movendis PP-XPA1557-EPDM-AS

MOVENDISBrand We Carry

V-belt Movendis PP-XPA1557-EPDM-AS

Manufacturer part numberPP-XPA1557-EPDM-ASAlso known as: PPXPA1557EPDMAS · PP XPA1557 EPDM AS
Subcategory
V-belts
Section
XPA
Series
PowerPlus EPDM Cogged Raw Edge Narrow
Get a quote for PP-XPA1557-EPDM-AS on WhatsApp

We reply promptly.

Tell us the quantity you need and request a quote by WhatsApp or email.

Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.

Ask on WhatsAppAsk by email

Description

MOVENDIS PP-XPA1557-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPA1557-EPDM-AS and any equivalents.

The Movendis PP-XPA1557-EPDM-AS is a cogged narrow V-belt in the XPA profile with a length of 1557 mm. Before you fit it, inspect the drive and sheaves so the new belt runs true from the start.

Check sheave grooves for wear, rust, burrs or embedded debris. Worn grooves let a new belt sit too deep, so it slips and wears quickly. Confirm the sheaves are aligned and the shafts turn freely. Look at the old belt for uneven side wear, cracks or glazing; these point to a drive problem that a new belt alone will not fix.

Set the correct tension for the XPA profile and 1557 mm length, then recheck it after the first run-in. Keep sheaves clean and free of oil or grease. If the drive uses several belts, replace them as a set so the load stays even.

For a quote, send the part number PP-XPA1557-EPDM-AS by WhatsApp or email. If you are unsure of the profile or length, send the marking on the back of the old belt and a photo of the drive.

Dimensions

Section
XPA
Length
1557mm

Frequently asked questions

What should I check on the drive before fitting this belt?
Inspect the sheave grooves for wear, rust, burrs and debris, confirm alignment and free rotation, and review the old belt for uneven wear, cracks or glazing. Correct any drive issue before fitting the new belt.
How do I confirm this is the right belt?
Compare the XPA profile and 1557 mm length against the marking on your old belt. If they match, the Movendis PP-XPA1557-EPDM-AS is the correct size.
What do I send to request a quote?
Send the part number PP-XPA1557-EPDM-AS by WhatsApp or email. If you are unsure, include the marking on the back of the old belt and a photo of the drive.
Get a quote for PP-XPA1557-EPDM-AS on WhatsApp
Quote on WhatsApp