V-belt Movendis PP-XPA1532-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPA
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-XPA1532-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPA1532-EPDM-AS and any equivalents.
When you need to replace a cogged narrow V-belt, start by reading the marking on the old belt. The Movendis PP-XPA1532-EPDM-AS is an XPA profile belt with a 1532 mm length. This page covers what to check and how to request a quote.
The marking on the back of the belt typically includes the profile and length, so you can match it directly to the part number. For this belt, the profile is XPA and the length is 1532 mm. The code PP-XPA1532-EPDM-AS identifies the Movendis PowerPlus EPDM Cogged Raw Edge Narrow series. If the old belt is worn or the marking is unreadable, measure the length and note the profile from the drive.
This is a cogged narrow V-belt, also called a wedge belt. The cogged raw edge construction is suited to drives with small pulleys, where standard wrapped belts may not flex as well. The EPDM compound is part of the series name and is designed for demanding operating conditions. When replacing belts on a multi-belt drive, inspect all belts and replace them as a set to maintain even tension and load sharing.
To request a quote, send the part number PP-XPA1532-EPDM-AS by WhatsApp or email. If you are unsure about the profile or length, include a photo of the old belt marking and the drive setup. We carry the Movendis line and can help confirm the right belt or suggest an equivalent based on the information you provide.
Dimensions
- Section
- XPA
- Length
- 1532mm
Frequently asked questions
- How do I read the marking on my old belt?
- Look for the profile and length on the back of the belt. The profile is usually a letter code such as XPA, and the length is given in millimeters. If the marking is worn, measure the outside length and note the profile from the drive.
- What does the part number PP-XPA1532-EPDM-AS mean?
- The part number identifies this as a Movendis PowerPlus EPDM Cogged Raw Edge Narrow belt with an XPA profile and a 1532 mm length. The series name indicates the construction and material.
- Can I replace just one belt on a multi-belt drive?
- It is best to replace all belts on a multi-belt drive at the same time. Mixing new and worn belts can cause uneven tension and load sharing, which may lead to premature failure.