V-belt Movendis PP-XPA1482-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPA
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-XPA1482-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-XPA1482-EPDM-AS and any equivalents.
This Movendis PowerPlus EPDM Cogged Raw Edge Narrow belt is a cogged narrow V-belt in the XPA profile, 1482 mm long. Cogged narrow V-belts are used on industrial drives where a compact, high-capacity belt is needed, such as pumps, fans, compressors and machine tools. Confirm fit by matching the profile and the length to your drive.
The XPA profile and 1482 mm length are the two dimensions to check against the old belt. Read the marking on the back of the belt: it should show the profile and length. If it reads XPA and 1482 mm, this belt matches. Also check the sheave groove width and the number of ribs or grooves to be sure the profile is correct.
Cogged narrow V-belts are common on drives that run at higher speeds or need a smaller cross-section than a classic V-belt. The raw edge and cogged construction help the belt run cooler and flex over small pulleys. Inspect the drive for worn sheaves, misalignment and correct tension before fitting a replacement. If a drive uses more than one belt, replace the full set at the same time so the load stays even.
To request a quote, send the part number PP-XPA1482-EPDM-AS by WhatsApp or email. If you are unsure of the profile or length, send a photo of the marking on the old belt and the sheave dimensions. The team can confirm the belt or suggest an equivalent.
Dimensions
- Section
- XPA
- Length
- 1482mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the marking on the old belt for the XPA profile and 1482 mm length. Also measure the sheave groove width and count the grooves to confirm the profile.
- Can I replace just one belt on a multi-belt drive?
- It is best to replace the full set at the same time. Belts wear at different rates, and mixing old and new belts can cause uneven load and vibration.
- What information do I need to send for a quote?
- Send the part number PP-XPA1482-EPDM-AS. If you are unsure, include a photo of the belt marking and the sheave dimensions so the team can confirm the correct belt.