V-belt Movendis PP-SPZ2120
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- PowerPlus Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-SPZ2120 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-SPZ2120 and any equivalents.
When a drive belt needs replacing, the marking on the back of the old belt is your most reliable starting point. This page covers the Movendis PP-SPZ2120, a narrow wedge V-belt in the SPZ profile with a 2120 mm length. Use the data here to confirm it matches the belt you are removing.
The PP-SPZ2120 is built to the SPZ profile: 9.7 mm top width, 8 mm height and a 40° angle. Its 2120 mm length is the reference dimension to compare against your existing belt. Movendis groups this belt in its PowerPlus Narrow Wedge V-Belts series, so the back of the belt should carry the PP-SPZ2120 marking along with the profile and length.
Before quoting, read the old belt's back. Look for the profile (SPZ), the length (2120 mm) and the part number (PP-SPZ2120). If the marking is worn or unreadable, measure the top width, height and outside length where possible, and send those values with a photo of the belt. That gives our team the details needed to confirm the correct replacement or suggest an equivalent.
This belt is a narrow wedge V-belt, not a classic V-belt, cogged belt, timing belt, Poly-V or banded belt. Matching the profile and length is essential because a different profile will not sit correctly in the pulley grooves. If you are replacing more than one belt on the same drive, note the quantity and any set marking on the old belts so the new belts can be supplied as a matched set.
Dimensions
- Section
- SPZ
- Length
- 2120mm
Frequently asked questions
- How do I confirm the PP-SPZ2120 is the right belt for my drive?
- Read the marking on the back of the old belt. It should show the profile (SPZ) and the length (2120 mm). If the part number PP-SPZ2120 is also printed, that is a direct reference. If the marking is unclear, send us the top width, height and length you measure, plus a photo.
- What are the dimensions of the Movendis PP-SPZ2120?
- It has an SPZ profile with a 9.7 mm top width, 8 mm height and 40° angle. The length is 2120 mm.
- Can you help if I need to replace a set of belts?
- Yes. Send the part number, quantity and any set marking from the old belts. We will confirm the PP-SPZ2120 or suggest an equivalent so you can replace the set together.