V-belt Movendis PP-SPZ2000
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- PowerPlus Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-SPZ2000 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-SPZ2000 and any equivalents.
The Movendis PP-SPZ2000 is a narrow wedge V-belt from the PowerPlus series. It has an SPZ profile, a 2000 mm length, a 9.7 mm top width, an 8 mm height and a 40 degree angle. Narrow wedge V-belts are used in industrial drives where a compact cross-section carries the load.
To confirm fit, match the belt you are replacing. Check the profile and the length on the old belt: SPZ and 2000 mm. Also compare the top width, height and angle against the values above. If the marking on the back of the belt is worn or unreadable, measure the top width and the outside length and send those numbers with your request.
The PP-SPZ2000 is a single belt. On drives with multiple belts, inspect the full set and replace belts as a set so the load stays even across the grooves. Check the sheaves for wear, alignment and correct groove profile before installing a new belt.
We carry the Movendis PowerPlus line and supply maintenance, engineering and purchasing teams across the United States, Canada, Mexico and South America. Send the part number PP-SPZ2000 by WhatsApp or email to request a quote. If you are unsure of the exact belt, include the old marking or your measurements and the team will help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPZ
- Length
- 2000mm
Frequently asked questions
- How do I confirm that the PP-SPZ2000 is the right belt for my drive?
- Compare the profile and length marked on the old belt with SPZ and 2000 mm. Also check the top width, height and angle against 9.7 mm, 8 mm and 40 degrees. If the old marking is not readable, measure the belt and send the dimensions.
- Should I replace all belts on a multi-belt drive at the same time?
- Yes. On a drive that uses more than one belt, replace the belts as a set. Mixing a new belt with worn belts can cause uneven load across the grooves. Inspect the sheaves for wear and alignment at the same time.
- What information should I send to request a quote?
- Send the part number PP-SPZ2000 by WhatsApp or email. If you are not certain of the part number, include the marking from the back of the old belt or your measurements, and the team will help confirm the right belt or suggest an equivalent.