V-belt Movendis PP-SPZ1437
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- PowerPlus Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-SPZ1437 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-SPZ1437 and any equivalents.
When a belt needs replacing, the most reliable starting point is the marking on its back. The Movendis PP-SPZ1437 is a narrow wedge V-belt in the SPZ profile with a 1437 mm length, a 9.7 mm top width, an 8 mm height and a 40 degree angle. Use those figures to match the belt you are removing.
Read the old belt before ordering. A marking such as PP-SPZ1437 identifies the profile and the length, and it is the quickest way to confirm that the replacement will sit correctly in the pulley grooves. If the back of the belt is worn or dirty, clean it and check the full string of characters.
This belt is built to the SPZ profile: 9.7 mm across the top, 8 mm high and a 40 degree angle, with a 1437 mm length. Compare each of those values with the belt in hand. If the marking is unreadable, measure the length and the top width and send those numbers with your request.
Send the part number PP-SPZ1437 by WhatsApp or email and our team will confirm the belt or suggest an equivalent. A photo of the old belt marking and the drive arrangement helps us verify the match before you install.
Dimensions
- Section
- SPZ
- Length
- 1437mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the old belt. If it reads PP-SPZ1437, the profile and length match this belt. You can also measure the top width and the outside length and compare them with the 9.7 mm top width and 1437 mm length listed here.
- What should I send to request a quote?
- Send the part number PP-SPZ1437 by WhatsApp or email. If the old marking is faded, include the top width and length you measured and a photo of the belt and the drive so we can confirm the correct replacement.
- What are the dimensions of this belt?
- It is an SPZ profile narrow wedge V-belt with a 1437 mm length, a 9.7 mm top width, an 8 mm height and a 40 degree angle.