V-belt Movendis PP-SPZ1400
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- PowerPlus Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-SPZ1400 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-SPZ1400 and any equivalents.
The Movendis PP-SPZ1400 is a narrow wedge V-belt in the PowerPlus series, with an SPZ profile and a 1400 mm length. Before you fit it, inspect the drive and sheaves so the new belt runs true from the start.
Check sheave grooves for wear, burrs, and embedded debris. A worn groove lets the belt sit too deep, so it slips and wears quickly even when the belt itself is correct. Confirm the sheaves are aligned and the shafts turn freely by hand.
Measure the old belt and compare it with the PP-SPZ1400: SPZ profile, 1400 mm length, 9.7 mm top width, 8 mm height, and a 40-degree angle. If the drive uses more than one belt, replace the full set so all belts share the load evenly.
For a quote, send the part number PP-SPZ1400 and the quantity you need. If you are unsure about the profile or length, include the marking on the back of the old belt and a photo of the drive.
Dimensions
- Section
- SPZ
- Length
- 1400mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect the sheave grooves for wear and damage, verify alignment, and make sure the shafts rotate freely. Correcting drive issues first helps the belt seat properly and last longer.
- How do I confirm the PP-SPZ1400 matches my old belt?
- Compare the profile and length: SPZ, 1400 mm. Also check the top width of 9.7 mm, height of 8 mm, and 40-degree angle against the old belt or the drive requirements.
- What information do you need to quote this belt?
- Send the part number PP-SPZ1400 and the quantity. If you want us to confirm the profile or length, include the marking on the back of the old belt and a photo of the drive.