V-belt Movendis PP-SPB1700
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- PowerPlus Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-SPB1700 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-SPB1700 and any equivalents.
The Movendis PP-SPB1700 is a narrow wedge V-belt in the SPB profile with a 1700 mm length. The 16.3 mm top width, 13 mm height and 40-degree angle match the SPB cross-section, so you can confirm fit by checking the old belt's marking and measuring its length. This is a PowerPlus series belt for drives that use SPB-profile narrow wedge V-belts.
When selecting a replacement, the SPB profile and 1700 mm length are the two key dimensions. The profile must match the pulley groove, and the length must match the drive's required center distance. The 16.3 mm top width and 13 mm height are consistent with the SPB cross-section, and the 40-degree angle is the standard wedge angle for this profile.
To verify you are ordering the right belt, read the marking on the back of the old belt. It should show the profile and length, such as SPB and 1700. If the marking is worn or missing, measure the top width and the outside length, or send a photo of the belt and the drive nameplate. Our team can help confirm the SPB profile and 1700 mm length before you order.
If you are replacing multiple belts on the same drive, order them as a set so they have the same length and wear characteristics. For a quote, send the part number PP-SPB1700, the quantity, and any details from the old belt or drive. We carry the Movendis PowerPlus line and can help you match the SPB profile and 1700 mm length.
Dimensions
- Section
- SPB
- Length
- 1700mm
Frequently asked questions
- What do the SPB profile and 1700 mm length mean for my drive?
- SPB is the cross-section that must match your pulley groove, and 1700 mm is the belt length. The top width is 16.3 mm, the height is 13 mm, and the angle is 40 degrees. Confirm these against your old belt or drive specifications.
- How do I confirm this is the right belt for my equipment?
- Check the marking on the back of the old belt for the profile and length. If it reads SPB and 1700, this belt matches. You can also measure the top width and outside length, or send us a photo of the old belt and the drive nameplate.
- Can I request a quote for the PP-SPB1700?
- Yes. Send the part number PP-SPB1700 and the quantity you need by WhatsApp or email. If you are replacing a set, include the number of belts on the drive. Our team will reply promptly to confirm the SPB profile and 1700 mm length.