V-belt Movendis PP-SPB1550
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- PowerPlus Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-SPB1550 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-SPB1550 and any equivalents.
This Movendis PowerPlus narrow wedge V-belt is identified by part number PP-SPB1550. It has an SPB profile, a 1550 mm length, a 16.3 mm top width, a 13 mm height and a 40° angle. Use it to replace a worn belt on industrial drives that take this profile and length.
Narrow wedge V-belts are common on drives where space is tight and higher power must be transmitted through a compact cross-section. The SPB profile and 1550 mm length are the two dimensions to confirm first. Check that the old belt is marked SPB and 1550, then compare the top width and height to the values above.
A worn belt can sit lower in the pulley groove, so measure the groove width if the old belt is stretched or damaged. Confirm the belt angle matches the pulley groove angle. If the drive runs multiple belts, replace them as a set so the load stays even across the grooves.
If you are unsure whether this belt fits your drive, send the part number from the back of the old belt along with the pulley groove profile and the center distance between pulleys. We can help confirm the SPB profile and 1550 mm length or suggest an equivalent.
Dimensions
- Section
- SPB
- Length
- 1550mm
Frequently asked questions
- What part number should I look for on the old belt?
- Look for PP-SPB1550 on the back of the belt. If the marking is worn, measure the top width, height and outside length and compare them to the values on this page.
- Can I replace just one belt on a multi-belt drive?
- It is best to replace all belts in the set at the same time. A new belt mixed with worn belts can sit at a different height in the groove and take more than its share of the load.
- What information do you need to confirm this belt for my drive?
- Send the old belt part number, the pulley groove profile, the number of grooves and the center distance between pulleys. We will check the SPB profile and 1550 mm length against your drive.