V-belt Movendis PP-SPA2232
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- PowerPlus Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-SPA2232 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-SPA2232 and any equivalents.
The Movendis PP-SPA2232 is a narrow wedge V-belt in the PowerPlus series. It has an SPA profile, a 2232 mm length, a 12.7 mm top width, a 10 mm height and a 40 degree angle. Use these dimensions to match it against the belt you are replacing.
The simplest way to confirm this belt fits your drive is to read the marking on the back of the old belt. If it shows an SPA profile and a 2232 mm length, the PP-SPA2232 is the correct match. You can also measure the belt directly: check the top width and height against 12.7 mm and 10 mm, and confirm the 40 degree angle. Because narrow wedge belts are used on compact, high-speed drives, a belt that is close but not exact can wear quickly or slip.
When you request a quote, send the part number PP-SPA2232 along with the old belt marking or your measurements. If the old belt is unmarked or the number is worn away, our team can help confirm the right belt or suggest an equivalent based on the profile and length. For drives that use multiple belts, replace them as a set so the load stays even across the grooves.
Dimensions
- Section
- SPA
- Length
- 2232mm
Frequently asked questions
- How do I confirm the PP-SPA2232 matches my old belt?
- Check the marking on the back of the old belt for an SPA profile and a 2232 mm length. If the marking is unreadable, measure the top width, height and angle and compare them with 12.7 mm, 10 mm and 40 degrees.
- What should I send with my quote request?
- Send the part number PP-SPA2232 and, if you have it, a photo of the old belt marking or your measurements. That lets our team confirm the profile and length before quoting.
- Can I replace just one belt on a multi-belt drive?
- On a drive that uses more than one belt, replace the full set at the same time. Mixing a new belt with worn belts can cause uneven tension and faster wear.